Ideas for printing aluminium bottles before ironing

General hot stamping products before hot stamping have to go through printing, monochrome printing and multicolor printing;

Hot stamping to be pressed concave and convex, UV glazing, coated, and then printing, die-cutting, paste box processing.

Hot printing should pay attention to a few points: dark thin printing, the use of strong coloring ink, in the ink as little as possible to add anti-adhesive and remove adhesive, try not to spray powder, printing ink, varnish and anodized aluminum hot stamping printing suitability match, should also prevent the impact of ink crystal on hot stamping.

In hot - hot processing pressure bump, die - cutting.

Paste box on hot stamping effect is not very big, just pay attention to prevent hot stamping foil scratch can.

Hot stamping if you want to uV varnish, should consider the acceptability of anodized aluminum, that is, anodized surface tension is greater than the surface tension of uV varnish.

If allowed, the hot stamping part of some products can be hollowed out.

If according to the requirements of the process to print UV varnish then hot stamping, should first check the UV varnish surface hot stamping suitability, generally with a dyne pen test UV varnish film, its surface tension in 3.810-2n /m above the anodized hot stamping.